Ultraviolet purification is a proven technology that can protect your family from waterborne disease-causing micro organisms, such as bacteria, viruses, algae, and fungi. Ultraviolet (UV) disinfection works by delivering concentrated amounts of UV light energy to the reproductive mechanism of the microbe, effectively killing it. As water passes through the UV chamber, it instantly disinfects it.
Ultra-Violet water purification systems harness the power of the sun to sterilize your drinking
water. Rugged stainless steel construction means that your system will give you many years of trouble-free service.
What is UV and how does it work? Ultraviolet is one energy region of the
electromagnetic spectrum, which lies between the x-ray region and the visible region. UV itself lies in the ranges of 200 nanometers (nm) to 390 nanometers (nm). Optimum UV germicidal action occurs at 260 nm. Since natural germicidal UV from the sun is screened out the earth's atmosphere, we must look to alternative means of producing UV light. This is accomplished through the conversion of electrical energy in a low-pressure mercury vapor "hard glass" quartz lamp. Electrons flow through the ionized mercury vapor between the electrodes of the lamp, which then creates UV light. As UV light penetrates through the cell wall and cytoplasmic membrane, it causes a molecular rearrangement of the microorganism's DNA, which prevents it from reproducing. If the cell cannot reproduce, it is considered dead.

Copper Series
This simple UV disinfection system has a minimal amount of parts with an integral electronic ballast with visual alarm (LED). The Copper family of systems is ideal for small POU (point-of-use) applications. 30 mJ/cm2
Silver Series
The Silver Series offer a family of UV disinfection systems that can be used in several types of applications where pricing sensitivity is a deciding factor but reliable equipment is still a must.
The smaller Silver systems are ideally suited for POU (point-of-use) type applications with the remaining models for POE (point-of-entry) larger flow applications which require disinfection of the water throughout an entire home or cottage. 30 mJ/cm2
Silver Plus Series
The Silver™ "PLUS" Series offer a family of UV disinfection systems that can be used in several types of applications where pricing sensitivity is a deciding factor but reliable equipment is still a must. All models are rated to deliver a 30 mJ/cm2 dose at end of lamp life to ensure a 99.99% reduction of bacteria & viruses. 30 mJ/cm2
Platinum SP Series
The Sterilight Platinum "SP" series has a range of 8 flow rates available from 15 to 52.0 USGPM for both POU (point-of-use) & POE (point-of-entry) type applications.
The Flow Pace™ sensor allows the system to operate with minimal power requirements & heat build-up during times of water stagnation. 30 mJ/cm2
Platinum SPV Series
The Sterilight Platinum "SPV" (Sterilight Platinum Validated) series carry the NSF 55, Class A certification. This family has a range of 5 flow rates available from 2.6 to 14.9 USGPM for both POU (point-of-use) & POE (point-of-entry) type applications.
All models of the SPV family deliver a 40 mJ/cm2 UV dose at the system's alarm set-point as per the NSF 55 protocol. With this validation you are ensured a 4-log (99.99%) inactivation of bacteria, virus & protozoan cysts (Giardia & Cryptosporidium)